SolidC UltraPure

Ypatingos „SolidC UltraPure“ išcentrinių siurblių savybės yra išorinis veleno sandariklis ir spyruoklė, apibrėžto suspaudimo sandarinimo žiedas ant galinės plokštės, be plyšių konstrukcija ir specialių standartų atitinkančios medžiagos.

solidc ultrapure centrifugal pump left side 640x360

Standartizuotas ir prieinamas


„SolidC UltraPure“ yra standartizuotas išcentrinio siurblio dizainas, idealiai tinkamas naudoti atliekant tokias pareigas kaip „Valymas vietoje“ (CIP) ir su pertraukomis pumpuojamas produktas. Tai yra pagrindinis pasirinkimas įrenginiams, kuriuose higienos ir pirkimo kainos derinys yra pagrindinis kriterijus.

Lengva išlaikyti švarą


„SolidC UltraPure“ išcentriniai siurbliai yra suprojektuoti su funkcijomis, kurios užtikrina vienodą veikimą ir pašalina bet kokią užteršimo riziką. Išsamių žinių apie procesą rezultatas buvo toks, kad būtų išvengta bet kokių plyšių, kuriuose gali kauptis užteršimas ar bakterijų dauginimasis. Tai leidžia greitai ir lengvai valyti „SolidC“, taupant laiką, valymo priemones ir sunaudojant labai gryną vandenį.

Kaip ir aukščiausios klasės „LKH UltraPure“, „SolidC UltraPure“ turi išorinį veleno sandariklį ir pusiau atvirą sparnuotę su pusiausvyros angomis. Kartu su įtrūkimų dizainu tai yra trys pagrindinės savybės, užtikrinančios galutinio produkto kokybę.

Tiekimas ir pristatymas


„SolidC UltraPure“ įrenginiai yra keturių skirtingų dydžių. Visi standartiniai komponentai yra sandėlyje, siekiant sutrumpinti pristatymo laiką ir išvengti nereikalingų prastovų.

„Biopharm“ dokumentų paketas


Visi „Alfa Laval“ biofarmo komponentai pristatomi su „Q-doc“ produkto dokumentais, pagrįstais BVP (gera dokumentavimo praktika). Q-doc paketą sudaro įrangos vadovai, gamyklos priėmimo bandymai / eksploatacinių savybių bandymai, kokybės ir gamybos procedūros, atitinkami medžiagų sertifikatai ir reikalingos dalys bei informacija apie aptarnavimą.

Garantija


„Alfa Laval“ suteikia 3 metų garantiją visoms nenusidėvėjusioms dalims, jei naudojamos originalios dalys.

Sertifikavimas, specifikacija ir standartai
„SolidC UltraPure“ asortimentas atitinka 3A ir CE taisykles ir turi EHEDG sertifikatą. Daugiau apie „SolidC UltraPure“ skaitykite produkto dokumentacijoje.

Product Benefits

  • Value
  • Repeatability
  • Reliability

Product catalogue

Close at hand online

Latest 'Close at hand' online version  

Find an Alfa Laval product

Alfa Laval LKH Prime

Premium goes Prime - Setting a new standard in self-priming pump technology.
Alfa Laval LKH Prime

Kaip tai veikia

SolidC UltraPure construction

The pump consist of a standard motor, stub shaft, mechanical compression coupling, stainless steel adaptor, back plate, impeller, pump casing and shaft seal.

Unique impeller design

SolidC UltraPure centrifugal pumps feature a unique semi-open impeller with a special vane design that ensures  particularly low NPSHr (Net Positive Suction Head required), which is the total pressure at the suction nozzle necessary for the pump to operate properly. This helps prevent cavitation effects, and minimizes any risk of mechanical damage.

The impeller also features balancing holes that provide excellent circulation in the shaft seal area as well as reducing axial forces on the impeller. This reduces wear on both the shaft seal and the bearings of the drive motor.

Semi-open impeller with balancing holes for high
cleanability of the shaft seal.

External shaft seal

The front-loaded external shaft seal, with the spring and washers mounted on the atmospheric side, is an important feature of the SolidC UltraPure design. This configuration makes maintenance rapid, easy and inexpensive – it only takes about 5 minutes to replace the shaft seal.

Using a front-loaded shaft seal, combined with the pipe couplings mounted on the pump housing, also means there is no need to disconnect or remove the pump casing for inspection or maintenance. This saves time and money, and helps keep downtime to a bare minimum. This feature also means that a spare pump without casing could also be quickly put into place .

Alfa Laval uses the same shaft seal for the whole SolidC UltraPure range – and the same seal is used in LKH UltraPure centrifugal pumps. This standardization keeps inventory down and makes replacing wearing parts a quick and easy task. 

solidcultrapure impeller housing 150x377

 

1: Defined O-ring groove providing firm positioning of the O-ring on pump casing and metal to metal contact provides a predefined compression of the O-rings with no crevices for contaminants.

2: External shaft seal with few wear parts and spring mounted on the atmospheric side, meaning no wear of the spring or other internal parts going into your product.